Display Trouble-shooting

Made to wear in, not out; if the threadless tops are not lying flush you may need to use an 16g taper to gently stretch the backing for its first use. Be sure to apply pressure on the backing material with your spare fingers while pushing the taper through to prevent any lifting. Then press the Threadless End into the display face using your thumb and index finger to wiggle and guide the pin into place so that the top lays flat.

To Clean 
: Use a slightly dampened microfiber towel and wipe in a circular motion. Then, repeat the same motion with a dry section of the microfiber towel.
As always, your feedback is greatly appreciated; email us at info@mayajewelry.com for any assistance or to share insights.
Shop All Displays and Branding Materials, here